การจำลองพฤติกรรมการไหลของโลหะเหลวที่ส่งผลต่อความเสียหายของเหล็กกล้าไร้สนิมในกระบวนการงานหล่ออินเวสต์เมนต์เข็มทออวน
Main Article Content
บทคัดย่อ
ในการผลิตเข็มทออวนซึ่งสามารถทนต่อการสึกหรอและใช้งานได้ยาวนานทำให้การผลิตสินค้าประเภทตาข่ายมีประสิทธิภาพดีได้รับการศึกษาอย่างละเอียด เพื่อกำหนดวิธีการขึ้นรูปให้ได้คุณภาพที่ต้องการ กระบวนการหล่อโลหะเป็นวิธีที่เก่าแก่ที่สุดที่รู้จักกันในการผลิต โดยกระบวนการหล่อในการหล่อการลงทุน เรียกว่า "หล่อขี้ผึ้ง" สำหรับการออกแบบการหล่อแม่พิมพ์ในกระบวนการหล่อขี้ผึ้งนั้นเป็นเรื่องสำคัญอย่างยิ่งที่จะต้องมีพฤติกรรมการไหลที่ราบรื่นของเหล็กกล้าไร้สนิมที่อุณหภูมิสูงกว่า 1600 °C โปรแกรม CAST-DESIGNERTM วิเคราะห์การไหลของโลหะเหลวเพื่อแสดงการจำลองการแข็งตัวของเหล็กกล้าไร้สนิมที่ทำให้เกิดข้อบกพร่องในผลิตภัณฑ์ ความไม่เหมาะสมของปรากฏการณ์การถ่ายเทความร้อนและการใช้แม่พิมพ์ที่ไม่เหมาะสมเป็นเงื่อนไขหลักที่นำไปสู่การหล่อที่มีข้อบกพร่อง เช่น การหมุนที่ไม่ถูกต้อง การปิดเย็น การหดตัว รูเข็ม รูอากาศ และความพรุนในผลิตภัณฑ์ขั้นสุดท้าย
Downloads
Article Details

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Journal of TCI is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0) licence, unless otherwise stated. Please read our Policies page for more information...
References
S. Jones, C. Yuan. (2003), Advances in shell moulding for investment casting, Journal of Materials Processing Technology 135, 258–265.
Adrian S. Sabau, Srinath Viswanathan. (2003), Material properties for predicting wax pattern dimensions in investment casting, Materials Science and Engineering A362, 125–134.
S. Lun Sin, D. Dube, R. Tremblay. (2008), An investigation on microstructural and mechanical properties of solid mould investment casting of AZ91D magnesium alloy, Materials Characterization 59, 178-187.
Barbara Previtali, Dante Pocci, Cataldo Taccardo. (2008), Application of traditional investment casting process to aluminium matrix composites, Composites: Part A39, 1606–1617.
M.M.A. Rafique, J. Iqbal. (2009) Modeling and simulation of heat transfer phenomena during investment casting, International Journal of Heat and Mass Transfer 52, 2132–2139.
Patpimol Suwankan, Nuttaphong Sornsuwit, Nuchthana Poolthong. (2015), Design of runner and gating systems for the investment casting of 431 stainless steel netting hook through numerical simulation, Key Engineering Materials 659, 647-651